For over a decade, we’ve stocked these adaptors to help motorhome owners with the 6-pin Mini-DIN (PS/2) cable in their vehicles.
The most common use is for Swift, Autotrail, and Bessacarr motorhomes, where customers want to replace a Sargent Electrical twin camera (RV207) with our twin-lens reversing camera. Our cameras are fully compatible with this setup, and the adaptors ensure a seamless connection.
This adaptor converts our 4-pin aviation connector twin camera into a 6-pin PS/2 connection, making it compatible with the Sargent Electrical system mentioned. However, we strongly advise against using these adaptors on other systems, as pin configurations may differ. We cannot take responsibility for any issues caused by trial-and-error testing with incompatible setups.
Reversing Camera Adaptor Cable to fit :
RV207 Twin Camera Systems using the EM5.0 / EM5.6 Box on Swift / Autotrail / Bessacarr Motorhomes (NOT SINGLE CAMERA SYSTEMS - THIS REQUIRES ADAPTOR G - WIRED UP DIFFERENTLY)
Which adaptor do I need?
- Driving / Rear View Camera: CAB99M
- Parking / Reversing Camera: CAB99M-Ch2
- Both Cameras: CAB99M + CAB99M-Ch2
- Replacing the monitor and removing the EM5.0/5.6 box to install one of our 4-pin monitors: CAB99F + CAB99F-Ch2
We also sell these adaptors individually if you only need to replace one camera.
⚠ Warning:
There are other connectors that may look similar to these adaptors, but they are not necessarily wired the same way. These adaptors are specifically designed ONLY for use with the Sargent Electrical system mentioned above in red.
Using them on any other system could result in incorrect connections, potential damage to your equipment, or complete incompatibility.
No liability will be accepted for any damage caused by using these adaptors on an unsupported system. Always ensure compatibility before purchase.
